32
English
The safety thermostat will have to be reset by the specialized technician LA SAN MARCO SPA,
who must first remove the cause of the malfunction.
9.2 Safety valve
The safety valve is installed on the upper part of the boiler, in the part corresponding to the area occupied
by the steam. The valve is activated if there is a considerable pressure increase inside the boiler. The valve
rapidly lowers the pressure by expelling the steam in the atmosphere (the valve trips in at 1,8 bar). If the sa-
fety valve trips in, the steam is held and dissipated inside the machine frame, so as to avoid hazards for the
persons around the machine.
In case of activation of the safety valve, switch off the machine and immediately contact the
specialized technician.If the safety valve is set off, switch the machine off and immediately con-
tact the authorized La San Marco technician.
10. information for users in the european community
Pursuant to European Directive 2012/19/EU on electrical waste (WEEE), users in the Euro-
pean community are advised of the following.
• The symbol with the crossed-out dustbin on the appliance or its packaging indicates that
at the end of the product’s life cycle, it must be collected separately from other waste.
• Suitable separate collection of the equipment for subsequent recycling, treatment and
disposal contributes to preventing possible negative consequences for the environment
and health, and favours the recycling of materials that the unit is made of.
• In accordance with European Directive 2012/19/EU, abusive disposal of the product by
the user will result in application of penalties as set forth by local law.
11. guarantee
The warranty becomes void if:
•
The instructions in this manual are not complied with.
•
The scheduled maintenance and repairs are carried out by unauthorized personnel.
•
The machine is used for any other than its intended purposes.
•
The original parts are replaced with parts from different manufacturers.
•
The warranty does not cover damage caused by neglect, use and installation not in compliance with the
recommendations of this manual, improper operation, abuse, lightning and atmospheric phenomena,
overvoltage, overcurrent, or insufficient or irregular power supply.
12. Declaration of conformity
The manufacturer:
la san Marco s.p.A.
34072 Gradisca d’Isonzo (GO) Italy – Via Padre e figlio Venuti, 10
phone (+39) 0481 967111 – fax (+39) 0481 960166 – http://www.lasanmarco.com
declares under its own responsibility that the ESPRESSO COffEE MACHINE (as identified by the data on the
tag located on the machine) is complaint with the following European directives: 2006/42/EC, 2014/35/EU,
2014/30/EU, Regulation (EC) no. 1935/2004, 2012/19/EU, 2011/65/EU.
for verification of compliance with said directives, the following harmonized standards have been applied: EN
ISO 12100, EN 60335-1, EN 60335-2-75.
AUTHORISED PERSON A
COMPILE THE TECHNICAL fILE
Eng. Roberto Nocera
Via Padre e figlio Venuti,10
34072 Gradisca d’Isonzo - ITALy
Gradisca d’Isonzo, December 2016
Ing. Roberto Nocera
C.E.O.
