Display
board
21
Setting temperatures
Upper zone (5 to 15 °C)
Press once the button
to select the upper area of the basement. Press a second time the same
button to increase/decrease the temperature of 1 degree Celsius or Fahrenheit. This zone is
programmed to be cooled between 5 and 15 ° C.
Scrowling menu
If the displayed temperature is 15 °C, by pressing once on the same button, the display will change to
5°C.
H
Press the button to turn on/off the upper+lower zone light,
lighting switches off automatically after 10 minutes.
I
White LED indication of the compressor working condition
J
Display shows the upper zone temperature at its setting,
10 seconds later it will automatically turn to actual temperature inside the wine cellar till reaching the setting one
High temperature alarm: T1≥30 ºC and lasted two
hours the temperature alarm buzzer, frequency 1Hz, digital
display "HH"
，
it will become normal once
T1≤29
ºC, alarm could be stoped immediately by pressing on/off
switch or removing the plug; Low
temperature alarm: T1≤2 ºC
and lasted half hour the temperature alarm buzzer,
frequency 1Hz, digital display "LL"
，
it will become normal once
T1≥3 ºC
, alarm could be stoped immediately by
pressing on/off switch or removing the plug.
K
Display shows the lower zone temperature at its setting.
10 seconds later it will automatically turn to actual temperature inside the wine cellar till reaching the setting one.
High temperature alarm: T1≥30 ºC and lasted two
hours the temperature alarm buzzer, frequency 1Hz, digital
display "HH"
，
it will become normal once
T1≤29
ºC, alarm could be stoped immediately by pressing on/off
switch or removing the plug; Low
temperature alarm: T1≤2 ºC
and lasted half hour the temperature alarm buzzer,
frequency 1Hz, digital display "LL"
，
it will become normal once
T1≥3 ºC
, alarm could be stoped immediately by
pressing on/off switch or removing the plug.
L
Temperature displayed in Fahrenheit.
M
Temperature displayed in Celsius.
N
Press the button first time to show lower zone setting temperature, raise/reduce temperature of 1 degree Celsius
or Fahrenheit from second time.
O
Press the button first time to show upper zone setting temperature, raise/reduce temperature of 1 degree Celsius
or Fahrenheit from second time.
P
On/off switch. When you plug the device into a power outlet, it automatically turns on with actual temperature
shows in the display, till reaching the memoried setting (setting temperature before turn off)
N+O
Select temperature display in Celsius or Fahrenheit by keep on pressing N+O 3 seconds
