25
•
Keep the appliance away from direct sunlight and sources of
heat (stove, heater, radiator, etc.). Direct sunlight may affect
the acrylic coating and heat sources may increase electrical
consumption. Extreme cold or hot ambient temperatures may
also cause the appliances not to perform properly.
•
Plug your device into an exclusive, properly installed-
grounded wall outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord. Any
questions concerning power and/or grounding should be
directed toward a certified electrician or an authorized
products service center.
•
To ensure proper electrical connection, follow the
recommendations given in the present manual.
•
Unpack the appliance and visually check that it is not
damaged. Do not connect a damaged appliance. Inform your
retailer or point of sale of any damage. In such a case, keep
the packaging.
•
When installing, the product should always remain in a
horizontal position and not be inclined at 45 ° C. It must also
not be positioned upside down
•
It is recommended that the appliance be allowed to settle for
at least 24 hours before connecting the electrical power
supply, so that the compressor fluid feed is correct.
•
Proper air circulation is necessary to avoid overheating. To
ensure sufficient ventilation, observe the installation
recommendations provided.
•
In order to avoid fire risk, wherever possible, ensure that the
appliance is not in contact with walls or with any hot element
(compressor,
condenser).
Observe
the
installation
recommendations.
•
The appliance should not be placed close to radiators or
