20
▪
The power socket must be easily accessible but out of reach of children. In case of doubt, contact
your installation technician
Daily utilisation
▪
Do not store inflammable substances or fluids inside the appliance. This would create a risk of
explosion.
▪
Do not operate other electrical equipment inside the appliance (mixers, whirling rotor for ice cream,
etc.).
▪
When disconnecting the appliance, grip the plug firmly and do not pull on the cable.
▪
Do not expose the appliance to direct sunlight.
▪
Keep the appliance away from candles, luminaires and open flames, in order to avoid fire risk.
▪
This appliance is only designed
to store wines and drinks.
▪
The appliance is heavy. Be careful when moving it.
▪
If your appliance is equipped with castors, remember that these are only designed to facilitate
minor movements. Do not move the appliance over long distances.
▪
Do not lean or climb on the appliance or its elements.
▪
In order to avoid falling objects and to prevent damage to the appliance, do not overload the
compartments of the appliance.
Caution! Cleaning and servicing
▪
Before carrying out servicing, switch off the power supply and disconnect the appliance.
▪
When cleaning the appliance, do not use metal objects, steam systems, volatile fluids, organic
solvents or abrasive substances.
▪
Do not use sharp or pointed objects to remove ice. Use a plastic scraper
.
Important information concerning installation!
▪
To ensure proper electrical connection, follow the recommendations given in the present manual.
▪
Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the packaging.
▪
It is recommended that the appliance be allowed to settle for at least 4 hours before connecting the
electrical power supply, so that the compressor fluid feed is correct.
▪
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe
the installation recommendations provided.
▪
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls
or with any hot element (compressor, condenser). Observe the installation recommendations.
▪
The appliance should not be placed close to radiators or cooking hot plates or gas rings
.
▪
Check
that electrical sockets remain accessible when the appliance is installed.
