26
5. USE INSTRUCTIONS
➢
Display board for single temperature zone models: PF110 and PF160
The temperature range of these wine cellars is from 5°C to 20°C.
H
Red LED indication of the selected temperature range.
(temperatures between 15°C and 20°C or 59°F and 68°F)
I
White LED indication of the selected temperature range.
(Temperatures between 9°C and 14°C or 48°F and 58°F)
J
Yellow LED indication of the selected temperature range.
(Temperatures between 5°C and 8°C or 40°F and 47°F)
K
Press the button to turn on/off the light.
L
Display shows the temperature at its setting, 10 seconds later it will automatically turn to
actual temperature inside the wine cellar till reaching the setting one
If the temperature is too high (>30°C), the code "HH" appears on the display and an audible
alarm sounds.
The audible ala
rm can be deactivated immediately by pressing the “on” / “off” button or by
unplugging the cellar. In this case please contact the after-sales service.
If the temperature is too low (<3°C), the code "LL" appears on the display and an audible
alarm sounds.
The audible alarm can be deactivated immediately by pressing the “on” / “off” button or by
unplugging the cellar. In this case please contact the after-sales service.
M
Temperature displayed in Fahrenheit.
N
Temperature displayed in Celsius.
O
Press the button to raise the temperature of 1 degree Celsius or Fahrenheit.
P
Press the button to lower the temperature of 1 degree Celsius or Fahrenheit
Q
Select temperature display in Celsius or Fahrenheit by pressing once
R
On/off switch. When you plug the device into a power outlet, it automatically turns on with
actual temperature shows in the display, till reaching the memoried setting (setting
temperature before turn off)
