7.3
Switching the Mortar Grinder ON and Off
Functions Starting the MG100 The ON/OFF and switch G is located at the rear of the machine,
Figure 2
The grinding parameters can now be selected and the machine is ready for operation. Push the
START button.
The Motor starts and the Mortar base plate start the rotation.
When connecting the machine to your local power supply source please pay attention to the
information on the sticker at the rear of the machine showing the technical information.
Figure 2
7.4
Inserting / replacing the Mortar and Pestle
Step 1) Open the Cover
Step 2) Insert the Mortar
Step 3) Insert the pestle
Step 4) Bring Pestle into proper position
In order to guarantee a smooth running operation of the MG100 it is necessary that both Mortar and Pestle are inserted
and made from the same material.
For example: Mortar and Pestle made from stainless steel or made Mortar and Pestle from Agate.
Attention: Never Mix
the Material (Agate and Steel) because of breakage.
Make sure that the Mortar and pestle are properly in the Holders of the machine. When removing and opening hot or cold
grinding jars always wear protective gloves.
12
LMMG100 MORTAR GRINDER MANUAL
