background image

 

35

Contact your supplier or plumbing professional for replacement parts 
or contact the company at the address given on the rating plate of the 
water heater. 
 
Provide the part name, model, and serial numbers of the water heater 
when ordering parts. 
 

READ THE WARRANTY FOR A FULL EXPLANATION OF THE LENGTH 
OF TIME THAT PARTS AND THE WATER HEATER ARE WARRANTED.

 

 

 

Complete the following information and retain for future reference: 
 
Model No:______________________________________________  
 
Serial No: ______________________________________________  
 
Service Phone 
Days: ___________________  Nights: 

 

 
Address:_______________________________________________  
 
Supplier:_______________________________________________  
 
Supplier Phone No: ______________________________________  
 

 

Manufactured under one or more of the following U.S. Patents: RE.34,534; 
B1 5,341,770; 4,416,222; 4,628,184; 4,669,448; 4,672,919; 4,808,356; 4,829,983; 
4,861,968; 4,904,428; 5,000,893; 5,023,031; 5,052,346; 5,081,696; 5,092,519; 
5,115,767; 5,199,385; 5,277,171; 5,372,185; 5,485,879; 5,574,822; 5,596,952; 
5,660,165; 5,682,666; 5,761,379; 5,943,984; 5,954,492; 5,988,117; 6,142,216; 
6,395,280; 6,684,821; 7,007,748; 7,063,132 
Other U.S. and Foreign patent applications pending.  Current Canadian Patents:  
1,272,914; 1,280,043; 1,289,832; 2,045,862; 2,092,105; 2,107,012; 2,108,186; 
2,112,515

 

Summary of Contents for INDIRECT-FIRED





































Reviews: