Lab12 gordian - Multifunctional Power Distributor / Conditioner
Page
4
of
10
Front Panel
Gordian front panel
In the front panel you will see the OLED display, the Navigation rotary knob and the Operation Mode
rotary knob.
The left rotary/push knob
(A)
is there for navigation into device's menu structure.
The OLED display
(B)
is located in the middle of front panel. There, you can see all the interface menu
details.
The right rotary knob
(C)
selects the processor operation mode (On, Sleep, Auto).
Rear Panel Connections
Gordian rear panel
On the rear panel you will find the output sockets, the main inlet and the main power switch.
From left to right there are four high filtered, low current outlets
(A)
and two low filtered, high current
outlets
(B).
When polarity is ‘ok’, the phase is always in the right side
pin of output sockets.
On the right side of the rear panel, the main power switch
(C)
and the power inlet
(D)
are located.
