6
5.3 Connecting the filling tube
-
Cut off the bottom of the filling tube diagonally.
-
Push the filling tube into the valve block as far as possible
–
with the diagonal end down.
5.4 Mounting the instrument on the bottle
- Can be done by screwing directly onto a GL 45 screw thread. For other bottles use the
included adapters.
- Hold the discharge tube and carefully remove the cap
-Slide the cap lock backwards on the tube support, away from the discharge tube.
Attention:
-
The adapters supplied with the instrument are made of
polypropylene (PP), and can only be applied for media
which does not attack PP
.
-
For small bottles use a bottle stand to prevent tipping
over
-Reagent may drop off the discharge tube end and cap,
be careful.
Summary of Contents for EASY 20K
Page 34: ...www labbox com...
