5
When adjusted, hold the tick icon/button until the display changes to show the temperature
inside the refrigerator. The red alarm light will display because the inside of the refrigerator
hasn’t had time to cool down yet and after a few seconds, the controller will alternate the
temperature screen with a
to1H
high alarm screen. The alarm will sound when this screen is
displayed.
After setting the month you next need to set the day. The controller will now flash
d
followed
by 2 digits, for example
d98
. Adjust the digits using the arrow icons/buttons as above, so if it is
21
st
June adjust the digits to
21
. When adjusted, touch the tick icon/button as before.
H/L
P
H/L
P
After setting the day you next need to set the hour. The controller has a 24 hour clock and will
now flash
H
followed by 2 digits, for example
d98
. Adjust the digits using the arrow icons as
above, so if it is 2 O’clock, adjust the digits to
14
. When adjusted, touch the tick icon/button
as before.
H/L
P
H/L
P
After setting the hour you next need to set the minutes. The controller now flash
n
followed
by 2 digits, for example
n98
. Adjust the digits using the arrow icons/buttons as above, so if it
is half past two, adjust the digits to
30
.
H/L
P
H/L
P
°
°t
1
C
H/L
P
H/L
P
