background image

13

Alarm Guide

Your 

I

ntelli

C

old® Pharmacy refrigerator is fitted with audio and visual alarms to help keep 

the contents safe. All can be muted but unless the alarm condition is resolved, the alarm will 

return after the time out interval (see page 8).

The controller will show a code to explain why the fridge is alarming. An alarm code screen 

alternates with the usual temperature screen. For all temperature, door and mains failure 

related alarms, a red dot will illuminate, regardless of which screen is currently displaying. For 

battery related alarms a battery icon will display.

t1H

  - This will display when probe 

t1

 detects that 

the air temperature has exceeded 8

o

C. Because high 

temperatures can adversely affect the contents of your 

fridge, it should always be investigated. The alarm will also 

sound when this screen is displayed.

1 l

2h

2l

l

o

b

t1L

 - This will display when probe 

t1

 detects that the air 

temperature is below 2

o

C. Because low temperatures can 

adversely affect the contents of your pharmacy fridge, it 

should always be investigated. The alarm will also sound 

when this screen is displayed.

t2H

  - This will display when probe 

t2

 detects that 

the temperature has exceeded 8

o

C. Because high 

temperatures can adversely affect the contents of your 

fridge, it should always be investigated. The alarm will also 

sound when this screen is displayed.

t2L

  - This will display when probe 

t2

 detects that the 

temperature is below 2

o

C. Because low temperatures can 

adversely affect the contents of your pharmacy fridge, it 

should always be investigated. The alarm will also sound 

when this screen is displayed.

L-b

 - This warns you that the controller has detected that 

the batteries are getting low. This alarm will only activate 

if batteries are installed and the battery alarm is enabled. 

See page 9 for instructions on how to do that. The alarm 

will also sound when this screen is displayed.

d-o

 - Door open alarm which displays if the door is left 

open for more than 90 seconds.The alarm will also sound. 

It does not cancel when the door is shut so you need to 

touch the mute icon/button when the screen shows 

d-o

The red light will go off to show it has been cancelled.

n-b

 - You will see this if batteries are not installed and the 

battery alarm is enabled, for example when you first plug 

the refrigerator in and haven’t yet installed batteries. If 

you do not want to install batteries, you can disable this 

alarm, see page 10.

Summary of Contents for IntelliCold RLDF/G 19

































Reviews: