17
If you do NOT press a button within 4 seconds the red LED will flash and you need to
start the process again.
Press the logo button and key in:
Existing user code i.e. 2244
02
New 4 digit user code
New 4 digit user code
Write the new user code for reference here
oooo
The fridge will now only open using the new user
code or a master key
Using the key
We advise that you purchase a master key with your lock, to be held by a responsible person,
because it will enable the refrigerator to be unlocked in the event of a mains power failure or
if the user code is forgotten. The master key is unique to
Labcold
digital combination locks.
Should you wish to use the lock as a digital lock again but have no record of the user code
please contact our service team on
01256 705 580
or
service@labcold.com
.
Changing the User Code
It is advised that you change the factory set user code so that you can control who has access
to your refrigerator.
The
user code 2244 is required to change the user code for the refrigerator when the code is
first changed. After the initial change, whatever is the existing user code will be required to
change the user code. All new user codes must be four digits long.
