21
Two plastic white clips are supplied with each draw. These must be pushed in to the holes
located on either side at the back of the drawer runner frame.
White plastic clip
Pointed end
Flat back
Use this way
up with the
pointed end
section at the
bottom of the
clip
The clips must be inserted with the protruding, pointed part of the clip at the bottom and
facing outwards of the frame.
When the drawer is placed in the refrigerator, the clips on either side will need to be pushed
against the racking to stop the drawer from tipping when fully extended.
Pointed end
of the clip
must be at
the bottom
Pointed end
of the clip
goes through
the drawer
hole
Flat back
Drawer runner frame
Hole in
drawer runner
frame to fi t
white clips
Insert one
each side
of drawer
Flat back
