1
Before Use
Thank you for purchasing a
Labcold I
ntelli
C
old® Pharmacy Refrigerator. Your fridge has been
purposely designed and precision built for the safe storage of vaccines, samples, reagents and
other temperature sensitive pharmaceuticals.
Although great care has been taken in the manufacture of your refrigerator, damage can occur
in transit. Before using for the first time please remove all packaging and give your fridge a
thorough visual inspection. If any damage is suspected, please contact your retailer immediately
upon receipt of the product. Failure to do so may invalidate your warranty.
Installation
Place your fridge in the location in which it is to be used.
Do not place your fridge near a direct heat source or direct sunlight and leave at least 6cm all
round the unit for adequate ventilation. Failure to do so may aff ect the performance of your
refrigerator.
Clean your fridge with mild soapy water to remove any dust that may have accumulated during
manufacture and dry thoroughly.
Ensure your fridge is level by adjusting the feet at the bottom of your fridge.
For models RLDF/G0519, 1019 and 1519, insert shelves by placing clips in the racking and resting
the shelf on top. When positioning the shelves, please remember to keep adequate room for air
circulation. Failure to do so may cause hot spots in the fridge.
YOUR REFRIGERATOR SHOULD NOW BE LEFT FOR AT LEAST SIX HOURS BEFORE
CONNECTING TO POWER FOR THE FIRST TIME
