1
Before Use
Thank you for purchasing a
Labcold
I
ntelli
C
old® Pharmacy Refrigerator. Your fridge has been
purposely designed and precision built for the safe storage of vaccines and other temperature
sensitive pharmaceuticals.
Although great care has been taken in the manufacture of your refrigerator, damage can occur
in transit. Before using for the fi rst time please remove all packaging and give your fridge a
thorough visual inspection. If any damage is suspected, please contact your retailer immediately
upon receipt of the product. Failure to do so may invalidate your warranty.
Setting Up
Place your fridge in the location in which it is to be used.
Do not place your fridge near a direct heat source or direct sunlight and leave at least 6cm all
round the unit for adequate ventilation. Models designed to be wall mounted do not need extra
space at the back because the cooling system is in the sides. Failure to do so may eff ect the
performance of your refrigerator.
Clean your fridge with mild soapy water to remove any dust that may have accumulated during
manufacture and dry thoroughly.
Ensure your fridge is level by adjusting the feet at the bottom of your fridge.
For models RLDF/G0501A, 1010A and 1510A, insert shelves by placing clips in the racking and
resting the shelf on top. When positioning the shelves, please remember to keep adequate room
for air circulation. Failure to do so may cause hot spots in the fridge.
YOUR REFRIGERATOR SHOULD NOW BE LEFT FOR AT LEAST TWO HOURS BEFORE
CONNECTING TO POWER FOR THE FIRST TIME
2
A Closer Look
Alarm Battery Back Up
Remote Alarm and
Labcold accessories
sockets
Insert 4 AA long life alkaline batteries (not supplied) in the holder
located on the right side of the unit
Batteries will only power the controller not the fridge.
Remote alarm and
Labcold
accessory sockets are located at the
back of the fridge. If you have a
Labcold
external alarm kit this
can be connected to the 2 pin connector on the left. The 4 pin
connector socket is for the
Labcold
accessory kit.
The maximum rating for the connection is 1A 30Vdc.
DO NOT CONNECT TO MAINS VOLTAGE
Door lock
Fan
Adjustable Feet
Adjustable Shelves
Maximum Load
10kg
Led Light
Front Panel Display
Battery Holder
(side of the fridge)
Serial Plate
SD Card
slot
Remote Alarm
and Accessory
Sockets
(back of fridge)
