background image

WARRANTY & CONTACTING LABCONCO 

 

 

Returned or Damaged Goods 

Do not return goods without the prior authorization from Labconco.  Unauthorized returns will not be accepted.  If 
your shipment was damaged in transit, you must file a claim directly with the freight carrier.  Labconco Corporation 
and its dealers are not responsible for shipping damages. 

The United States Interstate Commerce Commission rules require that claims be filed with the delivery carrier within 
fifteen (15) days of delivery. 

Limitation of Liability 

The disposal and/or emission of substances used in connection with this equipment may be governed by various 
federal, state, or local regulations.  All users of this equipment are required to become familiar with any regulations 
that apply in the user’s area concerning the dumping of waste materials in or upon water, land, or air and to comply 
with such regulations.  Labconco Corporation is held harmless with respect to user’s compliance with such 
regulations. 

Contacting Labconco Corporation 

If you have questions that are not addressed in this manual, or if you need technical assistance, contact Labconco’s 
Customer Service Department or Labconco’s Product Service Department at 1-800-821-5525 or 1-816-333-8811, 
between the hours of 7:00 a.m. and 6:00 p.m., Central Standard Time. 

Warranty

 

Labconco provides a warranty on all parts and factory workmanship.  The warranty includes areas of 
defective material and workmanship, provided such defect results from normal and proper use of the 
equipment. 

The warranty for all Labconco products will expire one year from date of installation or two years from 
date of shipment from Labconco, whichever is sooner, except the following; 

 

Purifier® Delta® Series Biological Safety Cabinets and PuriCare® Lab Animal Research 
Stations carry a three-year warranty from date of installation or four years from date of shipment 
from Labconco, whichever is sooner. 

 

SteamScrubber® & FlaskScrubber® Glassware Washers carry a two-year warranty from date of 
installation or three years from date of shipment from Labconco, whichever is sooner. 

 

Blood Drawing Chairs carry a ten year warranty. 

 

Carts carry a lifetime warranty. 

 

Glassware is not warranted from breakage when dropped or mishandled. 

This limited warranty covers parts and labor, but not transportation and insurance charges.  In the event of 
a warranty claim, contact Labconco Corporation or the dealer who sold you the product.  If the cause is 
determined to be a manufacturing fault, the dealer or Labconco Corporation will repair or replace all 
defective parts to restore the unit to operation.  Under no circumstances shall Labconco Corporation be 
liable for indirect, consequential, or special damages of any kind.  This statement may be altered by a 
specific published amendment.  No individual has authorization to alter the provisions of this warranty 
policy or its amendments.  Lamps and filters are not covered by this warranty.  Damage due to corrosion or 
accidental breakage is not covered.

 

Summary of Contents for 4799000











Reviews: