background image

Copyright © 2017 Labconco Corporation.  The information contained in this manual and the 
accompanying products are copyrighted and all rights reserved by Labconco Corporation.  Labconco 
Corporation reserves the right to make periodic design changes without obligation to notify any 
person or entity of such change. 

 

 

Returned or Damaged Goods 

Do not return goods without the prior authorization from Labconco.  Unauthorized returns will not be 
accepted.  If your shipment was damaged in transit, you must file a claim directly with the freight 
carrier.  Labconco Corporation and its dealers are not responsible for shipping damages. 

The United States Interstate Commerce Commission rules require that claims be filed with the 
delivery carrier within fifteen (15) days of delivery. 

Limitation of Liability 

The disposal and/or emission of substances used in connection with this equipment may be governed 
by various federal, state, or local regulations.  All users of this equipment are required to become 
familiar with any regulations that apply in the user’s area concerning the dumping of waste materials 
in or upon water, land, or air and to comply with such regulations.  Labconco Corporation is held 
harmless with respect to user’s compliance with such regulations. 

Contacting Labconco Corporation 

If you have questions that are not addressed in this manual, or if you need technical assistance, contact 
Labconco’s Customer Service Department or Labconco’s Product Service Department at 1-800-821-5525 
or 1-816-333-8811, between the hours of 7:30 a.m. and 5:30 p.m., Central Standard Time. 

 

 
 
 
 
 
 
 
 

Part # 3518100, Rev. L 

ECO L123 

 

Warranty

 

Labconco Corporation provides a warranty to the original buyer for the repair or replacement of parts and 
reasonable labor as a result of normal and proper use of the equipment with compatible chemicals. Broken 
glassware and maintenance items, such as filters, gaskets, light bulbs, finishes and lubrication are not 
warranted. Excluded from warranty are products with improper installation, erratic electrical or utility supply, 
unauthorized repair and products used with incompatible chemicals. 

The warranty for the Goldfisch Fat Extraction Apparatus will expire one year from date of installation or two 
years from date of shipment from Labconco, whichever is sooner.  Warranty is non-transferable and only 
applies to the owner (organization) of record. 

Buyer is exclusively responsible for the set-up, installation, verification, decontamination or calibration of 
equipment. This limited warranty covers parts and labor, but not transportation and insurance charges.  If the 
failure is determined to be covered under this warranty, the dealer or Labconco Corporation will authorize 
repair or replacement of all defective parts to restore the unit to operation. Repairs may be completed by 3

rd

 

party service agents approved by Labconco Corporation. Labconco Corporation reserves the rights to limit 
this warranty based on a service agent’s travel, working hours, the site’s entry restrictions and unobstructed 
access to serviceable components of the product.  

Under no circumstances shall Labconco Corporation be liable for indirect, consequential, or special damages 
of any kind.  This warranty is exclusive and in lieu of all other warranties whether oral, or implied.

 

Summary of Contents for Goldfisch Fat Extraction

















Reviews: