24
Chapter 5: Appropriate Applications For Your Vertical Clean Bench
Product Service 1-800-522-7658
•
Wear a long sleeved lab coat, rubber gloves and protective
eyewear. Wear a protective mask if appropriate. Consult
your Safety Officer for additional personal protective
equipment recommendations.
•
Wipe down interior surfaces with a mild household
detergent or disinfectant. DO NOT use abrasive cleaners,
bleach or solvents.
Loading Materials and Equipment
•
Load only the materials required for the procedure. Do not
overload the Clean Bench.
•
Do not obstruct the upper air diffuser screen.
•
Large objects should not be placed close together.
•
After loading, wait one minute to purge airborne
contaminants from the work area.
Work Techniques
•
Keep all materials inside the lower air foil, and perform all
operations as far to the rear of the work area as possible.
•
Segregate all clean and contaminated materials in the work
area.
Final Purging
•
Upon completion of work, the Clean Bench should be
allowed to operate for two to three minutes undisturbed, to
purge airborne contaminants from the work area before
shutting down the blower.
•
If equipped, turn on the UV light to decontaminate the
work area as determined by your Safety Officer.
Unloading Materials and Equipment
•
All open trays, weigh vessels or containers should be
covered before being removed from the Clean Bench.
Suitable Applications
Suitable applications for the Purifier Vertical Clean Benches are
based on guidelines established by the Institute for Environmental
Sciences. Particulates are filtered by the HEPA filter before air is
returned to the room. Biohazardous materials or other hazardous
solids cannot be used with the Purifier Vertical Clean Bench, as air
is directed over the work surface and out of the enclosure. The
Purifier Vertical Clean Bench
only
provides product protection
and offers no personnel protection whatsoever.
Summary of Contents for Purifier 3970200
Page 60: ...56 Appendix C Vertical Clean Bench Specifications Product Service 1 800 522 7658 C 1 ...
Page 61: ...57 Appendix C Vertical Clean Bench Specifications Product Service 1 800 522 7658 C 2 ...
Page 62: ...58 Appendix C Vertical Clean Bench Specifications Product Service 1 800 522 7658 C 3 ...
Page 63: ...59 Appendix C Vertical Clean Bench Specifications Product Service 1 800 522 7658 C 4 ...
