Shutting Down The Software Only
To shut down the software only :
1. From the Command Ribbon, click
File
or click on the
Gear
icon to display the
System Menu
.
2. Click
Exit
to close the software.
3. Or, click the Windows X button in the upper right-hand corner of application window.
Figure 64: System Menu
Shutting Down For Maintenance Or Transport
To shut down for maintenance or transport:
1. Turn off the Run Scheduler so that no new runs start. Let all runs finish so they can be archived to their final location.
2. Click
File
or the
Gear
icon to display the
System Menu
.
3. Click
Shutdown
to exit the software and shut down the computer. This initiates a controlled shutdown of the Access
system which shuts down the Echo instruments and powers off the Tempo controller.The following alert displays:
Figure 65: Shutdown Confirmation Dialog Box
4. Manually turn off the main AC power to the Access system using the Main Disconnect Switch. This switch is located above
the Echo Module.
Shutting Down The Access System
CHAPTER 7 | Basic Operations
67
