6
4) PROGRAM SELECTORS
The program selector allows the user to select the operating mode of the door.
Depending on the preference, it is possible to use the manual selector incorporated in the side cap of the automation NEXT, the
mechanical key selector EV-MSEL, or the digital selector ET-DSEL or T-NFC.
Each program selector is fully described below.
4.1) MANUAL PROGRAM SELECTOR
The 3-position manual program selector is the basic solution provided on the automation.
Position
I
=
Automatic bidirectional program
The door automatically opens after an opening command.
Position
0
=
Manual free door
Automatic operation is disabled and the door can be opened manually.
Position
II
=
a) Night lock program
The door can only be opened through the OPEN input or using the remote
control.
b) Open door program
The door remains motionless in the position of complete opening.
4.2) MECHANICAL KEY SELECTOR EV-MSEL
OPERATING MODE
Insert and turn the key of the selector EV-MSEL to select the desired program.
Open door program
The door remains motionless in the position of complete opening.
Manual free door
Automatic operation is disabled and the door can be opened manually.
Automatic bidirectional program
The door automatically opens after an opening command.
Automatic unidirectional exit only program
To disable entry detection on external Radar input.
Night lock program
The door can only be opened through the OPEN input or using the SPYCO remote control, if any.
The key can be taken out of the selector when in any position in order to prevent undesired changes to the work program.
It can operate in two
different ways depending
on the setting on the
electronic control unit of
the automation:
