7
4.3) ET-DSEL DIGITAL PROGRAM SELECTOR
Pressing once the button
select the automatic door operating mode.
Whenever the button is pressed, you switch from a work program to the next.
The operating programs which can be selected using the button
are described below.
Automatic unidirectional exit only program
To exclude the incoming detection on external radar input.
Open door program
The door remains stationary in complete opening position.
Manual free door
Automatic operation is disabled and the door can be opened manually.
Automatic bidirectional program
The door automatically opens when each opening control activates.
Automatic unidirectional entry only program
To exclude the exit detection on internal radar input.
Night lock program
The door can only be opened through the OPEN input or using the remote control, if any.
Operation of other buttons located on ET-DSEL program selector panel
Partial opening
, used only in a double leaf door automation
To activate the partial opening press the button
once;
The symbol on the display indicates that the function is on.
In a double leaf door, only the first leaf (Master) opens if the opening command is given by the internal or
external radar inputs.
The partial opening only operates in bi-directional, single-direction, and open door automatic programs.
In order to disable partial opening, press again button .
F2
Can have two distinct functions, depending on the setting of the automation.
a) Disables spring actuated door reclosing after a manual opening.
With F2 off, the door closes, with F2 on, the door remains stationary after a manual opening.
b) Disables step by step operation
(if enabled in the settings on the automation electronic control unit)
Push once the button F2 to disable step by step operation and enable the automatic closure of the door.
The symbol F2 lights up on the display.
To activate step by step operation, press again the button F2. The symbol F2 turns off on the display.
F1
Door opening command
Pressing the F1 button will open the door.
The F1 button can open the door even when the "NIGHT LOCK" work program is selected, if the
automation electronic control unit is set accordingly.
