© Advanced Labelling Limited July 2008
-
11
-
LabelStation Pro Series Set Up Manual July 2008
Make sure hands are not placed in the printer when closing the top cover.
Do not free fall the top cover.
Failure to securely close and lock the cover will result in poor print quality.
Fig. 9. Correct Label installation
2.3.1.
Using the External Roll Holder (Optional)
Fig.10. Attaching the External Roll Holder
•
Attach an external roll holder to the bottom of the printer by lining up the notches on
the holder to the holes on the base of the printer
•
Open the printer top cover by pushing forward the top cover open levers.
•
The top cover support will hold the printer top cover.
•
Install a roll of labels (loaded onto the label spindle) on the external paper roll mount.
•
Feed the labels through the external label feed opening through the rear paper guide.
Printer Top
Cover
Teflon Bar
Support Bar
Paper Roll Mount
Top Cover Open Lever
Paper
Guide