Introduction:
Your Labgear 4 way splitter splits the signal from a single HDMI
source input to four HDMI display outputs simultaneously.
The splitter supports full Ultra HD 4k x 2k (3840 x 2160) and dual
stream 3D. The HD input device can either be controlled at
source or remotely from any of the display locations using an
IR receiver* with an HDMI break in adaptor and an IR emitter.
The splitter is housed in a high quality metal housing.
Pack Contents
• 1x 4 way HDMI splitter
• 1x 5V DC power supply
• User manual
Features
• HDMI, HDCP 1.2 and DVI compliant
• Supports full 3D pass-through
• Supports 4k x 2k high resolution
• Bi-directional IR control system
• Support for CEC bypass
• Automatic EDID management
*Please Note IR receiver, HDMI break in adaptor and IR emitter
are sold separately in a kit part no. HDM IRK
