6
<Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch>
If you want to watch programmes from more than one satellite (For instance from Astra
and from HotBird) it is suggested to use fixed dishes and a DiSEqC 1.0 switch. Have your
installer aim the dishes at the requested satellites and connect the LNBs with coax cables
to the IN connectors of the DiSEqC 1.0 switch. Connect the OUT connector of the
DiSEqC 1.0 switch tothe LNB IN connector at the back of your receiver.
<Connecting a dish on a motorized positioner to your receiver>
Another option to watch programmes from multiple satellites is by mounting a dish to a
motorized DiSEqC 1.2 positioner.
Have your installer mount the dish to the positioner, set the correct azimuth (angle of
elevation) and let him set the centrepoint for your positioner.
Connect the LNB with a coax cable to the LNB IN connector of the positioner, and
connect the OUT connector of the positioner to the LNB IN connector at the back of your
receiver.
z
Turn on your TV, and select correct input.
z
Plug the receiver power cord into the 240V/100V AV power socket on the wall.
z
Press the “
POWER
Switch
” on the rear panel of the receiver to start. Wait a
moment till the “
Lock light
” (yellow color) is on. Then press the “
POWER
” button
on the front panel.
