Transport and storage conditions
Ambient temperature: -40 °C to +40 °C
Relative humidity: 30% to 75%
Air pressure: 500 to 1060 hPa.
If the device cannot be operated safely anymore, it must be removed from operation and protected from
unintentional or unauthorised operation. In order to rule out damages caused by the transport, a visual in-
spection of the device should be performed prior to the initial operation. Please note: The device may be
transported in the original or an equivalent packaging only.
Technical parameters
Symphony hygiene module handpiece
Rated voltage: 12 V – (DC)
Power input: 1.5 W max
Operating conditions:
Ambient temperature: +10 °C to +35 °C
Relative humidity: 30% bis 75%
Operating frequency: 50-140 stitches per second
Drive: Precision engine - DC
Operating mode: continuous operation
Length, diameter: 135 mm, 19 mm
Overall weight: 400 g
Weight of the handpiece: approx. 50 g
LaBina
®
PL-500 Control pigmentation instrument
Art-No: LaBina-PL500-Control
Control unit
Rated voltage: 15 V – (DC)
Power input: 7 VA max
Wall wart: as stated on the type plate
Level of protection: 2
Operating conditions:
Ambient temperature: +10 °C to +35 °C
Relative humidity: 30% to 75%
17
Supplies
For the Symphony hygiene module hand-
piece of the LaBina
®
PL-500 Control the
hygiene modules listed on the left are
required. Every unit contains 15 hygiene
modules.
Manufacturer:
MT.Derm GmbH
Gustav-Krone-Straße 3 14167 Berlin
Germany
Distributor and vendor for devices,
accessories and supplies
PERMANENT-Line GmbH & Co. KG
Mengeringhäuser Str. 15
34454 Bad Arolsen, Germany
Telephone: +49 (0)5691 8953-0
E-Mail: Info@LaBina24.de
Internet: www.Labina24.de
Description
Art-No:
1st-Liner hygiene module
E-0401
1st-Micro hygiene module
E-0401C
1st-Nano-N1-Hygienemodule
E-0401N1
1st-Nano-N2-Hygienemodule
E-0401N2
3rd-Liner hygiene module
E-0403
3rd-Outline hygiene module
E-0430
3rd-Slope hygiene module
E-0403S
4th-Flat hygiene module
E-0404
5th-Shader hygiene module
E-0405
5th-Magnum hygiene module
E-0405M
5th-Slope hygiene module
E-0405S
7th-Round hygiene module
E-0407
9th-Magnum hygiene module
E-0409
Microlift module needle plate
E-MM00020
