2
| LABNET 311DS SHAKING INCUBATOR
1.4 Specifications
Dimensions (W x D x H)
6.75 x 12.75 x 14.25 in. (17.1 x 32.4 x 36.2 cm)
Weight
27 lbs. (12 kg)
Sealing Temperature
Off, 100°C to 190°C (increments of 1.0°C)
Temperature Accuracy
±1.0°C
Temperature Uniformity
±1.0°C
Sealing Time
0.5 to 10 sec. (increments of 0.1 sec.)
Compatible Plate Materials
PP (Polypropylene)
PS (Polystyrene)
Compatible Plate Types
Standard assay plates
Deep well storage plates
PCR plates: skirted, semi-skirted, non-skirted
Maximum Plate Height
1.77 in. (4.5 cm)
Compatible Sealing Film Types
Foil polypropylene laminate
Clear polyester-polypropylene laminate
Clear polymer
Thin clear polymer
Foil laminate
Foil
Electrical Requirements
PS1000
PS1000-230V
120V ±10%, 50/60 Hz, 450W, 3.15A
230V ±10%, 50/60 Hz, 450W, 2A
Overvoltage Category
Category II
Environmental Conditions
15°C to 30°C, ≤80% RH
Storage Temperatures
0°C to 60°C
The Labnet AccuSeal™ semi-automated plate sealer is designed to be safe at least when operated under the following conditions:
Indoor use
Altitude up to 2,000 meters
Pollution Degree 2
Product should be placed on a flat surface at least 12 in. (30.5 cm) from walls, 48 in. (122 cm) from ceilings, and 12 in. (30.5 cm) from
other equipment.
2.0 Getting Started
2.1 Installation
1. Unpack the instrument carefully and place on a level stable surface that can withstand its weight. Do not block ventilation
openings on the back.
2. Remove and identify all components from the box.
Power cord
Seal frame
Plate sealer
PCR plate adapter block for 96- or 384-well microplates
Support block for storage plates
Instruction manual
3. Remove the protective plastic bag and any protective film.
4. Plug the power cord into the back of the instrument, and plug the other end into a properly rated outlet. Confirm the voltage rating
listed on the instrument is properly labeled to 110V or 230V as required.
5. Always use PPE, gloves, eye-wear, etc. accordingly to your experiment protocols’ requirements.
6. Switch the main power to ON.
7. The front control panel display will illuminate.
