“
6
” “
5
”
- 2 -
PA
Set
o
- 40.0 C
o
- 40.0 C
Up
Up
Down
o
- 40.0 C
LF-300D
Enter
o
- 40.0 C
Down
CHAPTER 2. PRE-INSTALLATION:-
1)
How to Transport:
Pick up the unit from the bottom of tank and a slant with 45° is acceptable. All
transportation should be done carefully.
CHAPTER 3. OPERATION DIRECTION:-
3.1
2)
Remove all wrappers.
3)
Check accessories and documents according to package list.
4)
Clean the unit thoroughly before any operation.
5)
Installing Location :
Do not keep the unit in direct sunlight or near heating diffusers, radiators, or other
o
sources of heat. The ambient temperature should not exceed 32 C. A minimum 20cm space on the sides,
rear and top should be provided for better air circulation and heat discharge. Avoid location where there is too
much cold, high humidity and can be easily splashed by water.
Safety Introduction:-
1)
Power supply :
This LF-300D freezer is designed for operating under 220V/50HZ AC power supply. The unit
can normally start under the voltage varying from 198V to 242V.
2)
Must provide one single exclusive plug receptacle with credible grounding to the unit.
3)
Inflammable and explosive materials, as well as high corrosive acid and alkali must be strictly prohibited in
cabinet.
4)
Keep the keys properly, so that the children's can't be able to open the back door which may result in
unexpected injury.
5)
To avoid cold injury, please place and remove goods with protective gloves.
Function Introduction for Display Panel:-
:
LCD Window:
These windows display the real temperature of Up/down chambers under
normal running condition and display different hint string under set conditions:
:
Function Adjustment Pads:
Press these pads to show different functions combining with
different function keys.
