5. OPERATION:
Notes: Keep [Paper Cover Holder] closed before lifting Paper Holder.
Be careful not to have your fingers pinched in closing [Paper Cover Holder].
5-1 SETTING LAMINATING TAPE
1. Paste the tape onto a sheet of paper slightly
wider than the tape. The paper should be
approx. 180mm long.
Paper Laminating Tape
2.
Loosen the knob of [Tape Core] and thrust
the tape into the core as shown till it hits
the end. Tighten the knob to secure the
tape in position.
Tape Core Knob
3. Draw out [Tape Core Holder] and place
[Tape Core] on it with the knob this side.
Then push the holder back into position.
Tape Core Holder Knob
4. After [Tape Cover Holder] was placed
into position, draw out [Tape Core Holder
Pressure Plate]and hook onto
[Tape Core Holder].
Tape Core Holder Pressure Plate
9
