5-3 OPERATION
LED indicators show the function currently in use and the buzzer warns the operator of the errors in operation.
Warning by buzzer
Notes 1 : Warning by buzzer works only when [START/STOP] switch is depressed to activate "Automatic
Laminating." The buzzer remains silent during manual feeding with [Paper Feed Knob], while [LED]
indicator is lighting on.
Notes 2 : Manual feeding with [Paper Feed Knob] tends to feed two sheets of papers at a time when [Paper
Holder] is not set correctly.
Notes 3 : When a laminating error takes place during manual paper feeding with the [Paper Feed Knob], [Space
Sensor LED] may light but the manual feeding may not halt. In such a case, it could happen that
adhesive on Adhesive Tape may stick to the rollers.
Therefore, manual feeding with the [Paper Feed Knob] must be carried out with utmost care.
Notes 4 : A double monitoring system is applied to the [Detection of the End of paper]; either by a sensor
detection or by a mechanical stopping mechanism to hold the operation.
When papers have run out, the [Paper Feed Knob] gets mechanically locked.
5-3-1 NORMAL OPERATION .
The 802 Automatic Sheet Print Laminator may be used in two ways as explained below.
① [Automatic Feed] activated with [AUTO] switch and [START/STOP] switch:
In the process of making photo stickers, drawing the tape triggers laminating job and photo papers
will be stuck automatically onto the tape. The process stops when and if the tape slackens.
② [Automatic Feed] using the [AUTO] switch without using [START/STOP] switch:
Automatic lamination goes on till set papers run out.
Plug AC Adapter securely to an outlet.
Depress the "|" end of [POWER] switch to turn on the unit.
[POWER] LED lights.
- 13 -
〇
SPACE
POWER
START/STOP
Detection by the Space Sensor
Detection of the end of papers
―
Turn on the power:
‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐
−−−−−−−−−−
―― ―― ―― ――
[Automatic Feed] activated with [AUTO] switch and [START/STOP] switch:
0.05sec.
0.25sec.
0.50sec.
1.
Incorrect setting of the Paper Holder
〇
SEN.ON
P.END
〇
〇
AUTO