20
Prima Mµ
6210000-795
Prima Mµ
Issue 1.6
Printed on Jan.,2021
CARE AND MAINTENANCE
• Protect it from improper handling. Never install other devices sockets or unscrew optical system and
mechanical parts unless explicitly instructed to do so in this manual.
• Protect the microscope from oil and grease. Never oil or grease the guide surfaces or mechanical
parts.
• Remove coarse contamination using a damp disposable cloth.
•
Use disinfectants refered as in section 16 (cleaning & disinfection) of this user guide.
•
Use special optics cleaning cloths and pure alcohol for cleaning lenses and eyepieces.
•
Clean optical components using a lint-free cloth. Soak the cloth using a little methanol or Glass clean
-er.Do not use ethanol and spirit.
•
LABOMED Max Lite
coating are fungal resistant. If you clean as described above, the coatings
will not be damaged.
•
If cleaning and disinfection is done as described insection 16 is no impact of multiple cleaning/
Disinfection on mechanical and optical parts. Paints & Coating are rigid and life long.
TROPICAL ENVIRONMENT/FUNGUS:
LABOMED employs certain safety precaution in its manufacturing techniques and materials. other
preventive measures include:
•
Keep optical parts clean.
•
Use and store them in a clean environment only.
•
Store under UV light when not in use.
•
Use in continuously climate-controlled rooms only.
•
Keep moisture away using silica gel and cover with a plastic cover.
OCCUPATIONAL SAFETY AND HEALTH PROTECTION:
Observe work safety and health protection of persons responsible for processing contaminated prod-
ucts.
Current regulation of hospital hygiene and prevention of infection must be observed in the prepara-
tion, cleaning and disinfection of the products.
INSTRUCTIONS
WORKPLACE:
Remove surface contamination with a paper towel.
REPROCESSING:
Recommended reprocess a product immediately after use or as & when required as per below
cleaning instructions.
