13
Lx POL
CENTERABLE REVOLVING NOSE PIECE
OBJECTIVES
4
5
9151000-795
Lx POL
Issue 1.3
Printed on April,2019
Fig. 11
Fig. 10
1
Fig. 10-a
3
2
Quartz Wedge
1-4 Order
4
LABOMED
US A
RP POL PLAN ACHRO
40X / 0.65 / 0.17
9124040
Lx POL comes with a centerable revolving nose piece to compen-
sate optical axis of each objective as they vary from one assembly to
another. Lx POL Nose Piece is fully equipped with centering mecha-
nism for each microscopic optical axis so that the specimen remains
in the center when the stage is rotated. Movement of the turret is
based on hard steel ball bearing which provides smooth and jerk
free motion around 360 degree.
This nose piece is highly precision parfocalized and par centered.
Fig. # 10
1. Objective Centering Allen Screws
2. Nose Piece Cover
3. Port for Lamda Plate
Centerable revolving turret is also equipped with a Nose Piece
cover which provides a click stop lockable port for Gypsum Lambda
wave plates fig. 10-a. This feature provides comfort while using
different Lambda Wave Plates. It is ideally located in between
specimen & the Analyzer. It allows to introduce compensator &
retardation plates between the cross polarizer which can enhance
optical path differences in the specimen details.
Lx POL objectives are free from stress & both types of ‘strain’ i.e.
glass characteristics during various stages of the assembly like
cementing or mounted in close proximity with tightly fitted
frames. Lx POL objectives are assembled only after passing the
strict testing. Lx POL comes with standard 4x, 10x, 40x objectives
that solve the purposes of viewing specimen in conoscopic &
orthoscopes modules. These objectives are anti-refraction coated.
Some other objectives like 20x & 100x are also available.