Laboratory2, LTD
Page8
Version of 05.09.2019
2 Voice recorder usage
2.1
Operating limitations.
To avoid the voice recorder failure, observe the following rules:
a) Do not allow hit of dust and moisture on microphones since it can lead to consider-
able deteriorations in performance data of the digital microphone;
b)
Protect voice recorder from mechanical shocks – severe bumps may lead to
possible microphone destruction.
If the voice recorder received mechanical damage during
operation and this led to its failure, it is not covered by warranty.
c) Store a dictophone separately from the power supply battery, in order to avoid elec-
trolyte leak.
2.2
Preparation of voice recorder for usage.
It is strongly advisable to read carefully this Manual before starting to use the voice re-
corder.
Before starting to use the voice recorder, it is necessary to carry out an external inspec-
tion for mechanical damage. On the surface, there should be no cracks, chips, dents. Metal
parts should not have any traces of corrosion.
Before the work, it is necessary to configure the voice recorder parameters according to
chapter 2.4 of this document.
Check the recording length of the voice in accordance with Table 2.
Check the microphone operation, make and listened to test recordings on your PC.
2.3
Setting voice recorder parameters.
Insert the micro SD card into the card reader. Format the micro SD under the filing sys-
tem FAT32.
Create a folder with any name on your computer.
Copy the
dict.exe
program from the supplied CD disk (or download it from our web-
site) into the created folder.
Run
dict.exe
program and following chapter 2.6 of this document create a configura-
tion file named
dict.ini
