Laboratory2, LTD
5.
Current repair of the voice recorder
5.1. General instructions
If any defect of the voice recorder is detected, repair works are needed. Current repair
of the voice recorder should be made at the factory or in the workshop.
Attention!!!
Unauthorized opening of the voice recorder leads to the withdrawing of the
warranty from the voice recorder.
BUTTON_TURN_OFF
Voice Recorder is turned off by pressing
BUTTON_TURN_ON
Turning the voice recorder on by pressing
SD_MEMORY_IS_OVER
No free space on the microSD - the voice recorder is
switched off
ALARM_TURN_OFF
Voice recorder is turned off by timer
ALARM_TURN_ON
Voice recorder is turned on by timer
SD_READ_TIMEOUT
Micro SD does not respond to a command to read data
SD_WRITE_FAILURE
Command to record data do not pass to micro SD
NO_SD_BLKWR_RESPONSE
There is no confirmation from mcroSD to the record-
ing data block
PROGRAM_BOR_RESET
Complete reset of the voice recorder. Called forcibly,
if the voice recorder has not detected a microSD
memory card or if the memory card of filing system
contains errors.
SNMI_INTERRUPT
Microprocessor system failure (it is necessary to save
the file INF_REG.TXT)
FLASH_ACCESS_ERROR
Error of the program (it is necessary to save the file
INF_REG.TXT)
OSCILATOR_FAULT
Hardware failure of the oscillator
NMIFG_INTERRUPT
Microprocessor system failure (it is necessary to save
the file INF_REG.TXT)
EMPTY_CELL
Empty cell
UNDEFINED_ERROR
Unspecified error or reset
DICT_SOFTWARE_NUMBER
Number of internal recorder software
Page
20
Version of 04.04.2019
