208
Nexam Pro User Manual
Chapter 12
Investigation settings
You can save investigation data at certain intervals during the investigation to
secure the data. Select the
Auto save
checkbox and enter during which
interval the measurement data has to be saved. You can also set the scroll
mode and the position of the channel information.
The position of the channel information (by default at the right side of the
screen) can be changed.
Under
Options
, the options for your measurement system are enabled. You
can find more information in the
Nexam Pro Service & Installation Manual
.
EMG
You can set the display for the EMG graphics. Also, settings for signal
processing are available (only possible for software version 9.3 or higher, and
only applicable for the WPU, WPM, or Neuro module). You can choose
Slow
average
(default),
Fast average
or
Peak amplitude
(in case you want the
fastest response of the EMG channel without a filter).
High-speed EMG settings
High-speed EMG is possible for specific hardware modules (Neuro module,
CIM, or WPU). To use high-speed EMG on the WPU, the WPU must be
connected using a digital cable to the system (Bluetooth connection is not
possible).
When the
High speed EMG
option is available and enabled in the settings, a
separate window will be displayed on top of the main measurement screen
during the pretest and the investigation. The window can be resized or moved
(to a second monitor) during the pre-test. You can also set the time base
(tracing clip out time) for the high-speed EMG window during the investigation,
and (de) select
Save high speed EMG
(deselecting saves hard disk space).
Colors
You can change the colors of the various items displayed on the screen:
artefact, background, baselines, cursor, grid, and so on. Select the object and
click on the new color. You can also define a set of graph colors. These colors
will be selectable in the channel settings. When you have defined all colors,
save the colors in a color scheme. You can define more than one color
scheme so that you can quickly change colors. Click the
Markers
button to
change the colors of the available markers.
Summary of Contents for Nexam Pro CIM
Page 1: ...Nexam Pro User Manual...
