220
Nexam Pro User Manual
Chapter 13
Marker name
Description
markers. The first marker should be placed on the base of the
cough peak, the second marker at the peak of the cough peak.
The software will calculate the % transmission for each
transmission marker chain.
Value
marker
With this marker, numerical values of the channels are displayed
at the marker position.
13.4.3 Reference Cursor
A reference cursor is used to display the difference between the measured
values at the position of the reference cursor and the
“normal” cursor. After
setting a reference cursor, the values displayed for each channel are marked
with a delta symbol to indicate that they are calculated relative to the values at
the reference cursor. When the reference cursor is active, you will see a check
mark in front of this menu option.
You can place the reference cursor as follows:
▪
Move the cursor line to the place where you want to position the reference
cursor.
▪
Click the
Reference cursor
button
or choose
Marker > Reference
cursor
from the menu.
To remove the reference cursor, click the
Reference cursor
button or select
Marker > Reference cursor
from the menu. You can also right-click the
graphs to deselect
Reference cursor
.
13.5 Options
13.5.1 Menu Overview
The following menu items are available:
Menu item
Function
Siroky plot
(male patients only)
Display the Siroky flow rate nomogram in a uroflow,
pressure-flow or gynecology study (see § 13.5.2).
Summary of Contents for Nexam Pro CIM
Page 1: ...Nexam Pro User Manual...
