Investigation with Luna Wireless Module Nexam Pro User Manual
179
The software will remind you to change the battery when necessary.
Connect the catheter and then click the
OK
button. Now you can perform the
investigation as described in chapters 3 to 9 (depending on the investigation
you choose).
To stop the investigation:
Click the
Stop investigation
button to finish the stationary
measurement or use the remote-control button.
▪
Exit the measurement program
to enter the database program.
▪
The measurement is now available for analysis.
11.3 From Stationary to Ambulatory Measurement
With the ambulatory software option, you can continue the ambulatory
measurement after the stationary measurement has been finished.
NOTE
Zero values of the stationary measurement will be taken
over automatically in the ambulatory measurement.
The procedure is as follows:
▪
In the database program, switch to ambulatory measurement by clicking
the
New investigation
button and selecting the Luna.
▪
The dialog box shown in Figure 11.3 opens.
Figure 11.3
Continue with an ambulatory investigation
Summary of Contents for Nexam Pro CIM
Page 1: ...Nexam Pro User Manual...
