Measurement Program
Nexam Pro User Manual
185
12.3.1 Pre-Test
When an investigation is selected from the measurement program, the pre-test
starts. The pre-test differs from the actual investigation in that data will not be
stored and markers cannot be placed. In general, the pre-test is a final check
and preparation before the actual investigation. The preparations depend on
the investigation type and the type of catheters being used.
12.3.2 Start Measurement
In the pre-test, click the
Start investigation
button or press the corresponding
key on the remote control to start the actual measurement. The measured
values will be shown in real time in curves on the screen.
Figure 12.3
Pre-test pressure-flow study
The name of the patient and the investigation name are shown at the top of
the screen. The functions of the buttons (keys on the remote control) are
Consumables
traceability button
Infused volume
Marker line
Button toolbar
Channel information
RC key buttons
Summary of Contents for Nexam Pro CIM
Page 1: ...Nexam Pro User Manual...
