Urodynamic Catheters & Transducers Nexam Pro User Manual
59
3.
Urodynamic Catheters & Transducers
3.1
Introduction
In this chapter, you will find instructions about preparing the catheters and the
pressure transducers before performing one of the following investigations:
•
cystometry,
•
pressure-flow study,
•
urethral pressure profile (UPP),
•
gynecology study.
The preparations of the catheters and transducers can be different, depending
on the type of catheters and transducers used, and the number of pressures
measured:
•
You can find information about how to prepare reusable solid-state
catheters in § 3.3.
•
You can find information about how to prepare air-charged catheters and
transducers in § 3.5.
•
You can find information about how to prepare water catheters and DT-XX
pressure transducers in § 3.6.
Figure 3.1
Solid-state catheter
Figure 3.2
Air-charged catheter
Figure 3.3
Water catheter
The instructions for water catheters in combination with the reusable Memscap
pressure transducers can be found in a separate document (document code:
MAN-00011).
Summary of Contents for Nexam Pro CIM
Page 1: ...Nexam Pro User Manual...
