It will now take about 6-10 hours before the set temperature is reached.
•
The freezer should be cooled down empty.
WARNING
WHEN FILLING THE UNIT WITH RACKS/BOXES, MAKE
SURE TO PRE-COOL THEM IN ORDER NOT TO EFFECT
THE INSIDE TEMPERATURE OF THE UNIT.
WARNING
THE INNER DOORS SHOULD BE USED AT ALL TIMES.
MAKE SURE TO CLOSE THEM TIGHTLY.
THE MANUFACTURER IS NOT RESPONSIBLE FOR DAMAGE
TO THE FREEZER CAUSED BY FAILURE TO DO SO.
WARNING
CLEAN THE FREEZER BOTH INSIDE AND OUT USING A
DAMP, WRUNG OUT CLOTH. DRY WITH A DRY CLOTH.
THE SMELL FROM THE PLASTIC PARTS IN THE FREEZER
WILL DISAPPEAR ONCE THE FREEZER HAS BEEN COOLED
DOWN.
6
CONTROL DISPLAY
G-214 CONTROLLER
TEMPERATURE CONTROL
Summary of Contents for MV85 Series
