1-9
GENERAL MAINTENANCE
1.0
GENERAL MAINTENANCE
DANGER, WARNING, CAUTION notations
appear throughout this manual and on labels
on and inside of the vehicle.
The word DANGER precedes
information, which indicates an
hazardous situation, which if not
avoided, WILL result in death or
serious injury of the user or others.
The word WARNING precedes
information, which indicates a
potentially hazardous situation, which
if not avoided, COULD result in
personal injury or death of the user or
others.
The word CAUTION precedes
information, which indicates a
potentially hazardous situation or
unsafe practice, which if not avoided,
MAY result in minor to moderate
injury to user or damage to the
equipment.
DANGER
WARNING
CAUTION
The word NOTE also appears in this manual
and precedes information, which is vital to
the proper operation and maintenance of
the vehicle equipment.
In spite of our efforts to build a vehicle that
is as safe as possible, the operator’s
safety certainly depends on the
precautionary measures taken while
operating or servicing the vehicle. If in
doubt,ask your supervisor or contact the
Labrie Service and Warranty Department
for any technical support you may require.
For maintenance of the chassis itself, refer
to the chassis manufacturer’s service
manual. Only body and packer components
are outlined in this manual.
Establish and apply a periodic inspection
program to keep moving parts in good
working order, properly adjusted and safe.
It is recommended that a brief inspection
be done by the operator EVERY DAY and
any detected malfunctions must be reported
for correction BEFORE using the
equipment.
Once a month, inspect the chassis and the
body for breaks, cracks or any potential
problems. Any defects found must be
repaired without delay. To ensure the good
working order of the equipment, particular
attention should be paid to structural
components in order to prevent
deterioration due to corrosion; touch-ups
and/or complete paint jobs should be done
when necessary.
Summary of Contents for Automizer Versa Hand
