Safety
25
Figure 2
-
16 Tailgate Selector switch
6.
With the Tailgate Up switch on the in-cab control panel (see Figure 2
12), raise the selected
tailgate about 3 feet (enough to lift and rotate the safety prop).
7.
Pull the safety prop upward and set it down (see Figure 2
13).
8.
Slowly lower the tailgate onto the safety prop using the Tailgate Down switch on the in-cab
control panel (see Figure 2
12).
N
OTE
:
If the tailgate is not resting properly on the safety prop, see
Tailgate Safety Prop Adjustment
page 26 to correct the problem.
Putting the Tailgate Safety Prop Back in Place (Co-Mingle Units)
To put the tailgate safety prop back in its home position:
1.
Start the engine.
2.
Turn ON the pump (see Figure 2
5).
3.
Raise the tailgate by about 3 feet using the Tailgate Up switch on the in-cab control panel
12).
4.
Raise the tailgate safety prop (see Figure 2
14).
5.
Release your grip on the safety prop to set it in its home position (see Figure 2
15).
ICC bumper
Support
Tailgate Selector
switch
Summary of Contents for EXPERT
