H50/150 Smart
–
User Manual
Page 9 of 32
Never operate a damaged or leaking equipment.
Never operate the unit without the cooling fluid in the reservoir.
Always turn off the unit and disconnect the power cord from the power source before performing any service or
maintenance procedure or before moving the unit.
Never operate the equipment with a damaged power cord.
Performance of installation, operation, or maintenance procedure other than those described in this manual may
result in a hazardous situation and may void the warranty.
Never use water (including distilled and deionized) in units installed in environments where temperatures go down
below 5°C. We recommend 1:1 mixture of water and glycol to avoid liquid freezing.
Never remove warning labels.
Never operate damaged or leaking equipment.
Never operate the unit without process fluid in the reservoir.
Observe all warning labels.
Other Information
Make sure you read and understand all instructions and safety precautions listed in this manual before installing or
operating your unit. If you have any questions concerning the operation of your unit or the information in this
manual, please contact us.
Transport the unit with care. Sudden jolts or drops can damage the unit components.
