INSTALLER’S MANUAL
CORMATIN
Page 8 of 40
Unscrew the screws
C
near the
burners openings (Figures 7 and
8). Remove the pan supports and
burners, pull and raise the top
after having loosened the 2
screws
D
(Figures 9a, 9b, and
10), wedge the cooking surface.
A pressure regulator (fig. 11) is
located in the right rear corner
under the hob, to gain access to
the pressure regulator, remove the
top.
The reversible cap is labeled either « LP » or « Nat » and is easily recognized by the raised center screw slot (for natural) or
the center depth (for LP).
To change LP to Natural or vice versa, the seal screw in the regulator lid is unscrewed, reversed and reinstalled to convert
from one setting to another (Figures 12 & 13).
Fig. 9a
D
Convertible regulator
Fig. 12
Figure 7
C
Figure 8
C
C
Fig. 11
Fig. 9b
Fig. 10
