Page 11 of 17 – US –
STABILITY DEVICE INSTALLATION INSTRUCTIONS:
Anti-tip bracket is designed to fit into the seam formed at the bottom of the range chassis and base plinth as shown in
Figure 1.The bracket can be mounted anywhere along the seam that the bracket can be freely inserted (Figure 2).
Mounting screws are not provided.
This bracket is designed to be mounted to a load bearing support such as a wall stud. This anti-tip device is designed
to only prevent the accidental tipping forward of the range. Depending on the state or municipality, local code may
require additional strapping of the appliance to prevent movement in seismic events.
Figure 1
