Page 12 of 17 – US –
SERVICE INSTRUCTIONS:
- Lubricating gas valves.
If the gas taps tends to stick slightly, you may follow this procedure:
1 - Shut off the gas supply valve and / or the main electrical supply of the unit.
2 - Take out the knob corresponding to the gas valve to be greased.
3 - Unscrew the head from the body of the burner valve.
4 - Grease the tap shaft (High temperature lubricant, for example: SILICAL GEL ™ BARBAHL).
Caution! Any excess grease should be removed.
Reverse operation 3 to 1 (in that order) to put valve and knob back on.
- SAFETY OVERLIMIT THERMOSTAT:
This purely mechanical switch governs the power sent to the electric oven only. It is subject to vibrations during
transportation. To access internal components: remove oven vent cover or lift and secure rangetop.
Press push button item
S
(Figure 27) in order to reset the overlimit thermostat.
Press this red button firmly, it may need extra force to reset.
Note:
ALWAYS IDENTIFY
the reason why the thermostat tripped.
Fig. 27
S