page 1
LaCie Ethernet Disk mini
User Manual
2. In the left-hand column (see figure at right) the IP addresses of all
available network devices are located. You’ll probably see only one
IP address (
fig. C
).
3. Select the address of the device to be modified. It is easiest to
configure your drive if only one Ethernet Disk mini at a time is con-
nected to the network.
4. When the Ethernet Disk mini is attached to a DHCP-enabled
network, the fields will show assigned (can’t be modified) addresses.
4.4. On a Local Area Network with no
DHCP Server
In this case, you will need to manually assign the correct network settings for your LaCie Ethernet Disk mini.
The easiest way to modify your LaCie Ethernet Disk mini’s network configuration is to install and use the LaCie IP Configura-
tor application. See 4.3.
Configure Your Drive on a DHCP-Enabled Network
for more information on using the network
configuration software.
Fig. C
TeChNICAl NOTe:
It can take up to 15 minutes for your com-
puter to recognize a network device such as the LaCie Ethernet
Disk mini.
Configuring Your Drive
ImpOrTANT INfO:
For information on how to assign a static IP address using a USB connection, see section 7.3.
To Assign a Static IP Address via USB
.
Summary of Contents for 300952U - Ethernet Disk Mini NAS Server
Page 1: ...Ethernet Disk mini v 2 0...
