LaCie Slim DVD±RW Drive User Manual
FireWire / LightScribe / Toast 7 Titanium
... Data Transfers
Data transfers are the flow of data that accomplishes a task, usually related to moving data from storage to computer RAM
or between storage devices. During data transfers, it’s best to wait before launching other applications on the same FireWire
port. Anomalies may arise with computers that have FireWire controllers* that do not conform to OHCI (Open Host Con-
troller Interface) standards. In any other configurations, we cannot ensure 100% correct operation. Due to this, you may
encounter hanging problems. If this happens, proceed as follows:
Make sure that the FireWire cable is connected tightly and securely on both ends of the cable, from the drive to thecom-
puter. If you are using a FireWire cable other than the one supplied with your LaCie drive, check that it is FireWire (IEEE
1394) certified. The cable that is provided with your LaCie drive is FireWire (IEEE 1394) certified.
Check that the power supply and ground connection are seated properly.
Disconnect your computer’s FireWire cable. Wait 30 seconds. Reconnect.
.
.
.
Helpful Information
page
CaUTIoN:
Do not connect FireWire cables so that they form a ring of devices. There is no need for terminators on
FireWire devices, so the unused FireWire connectors should be left empty.
Technical noTe:
*Controller - This is a component or an electronic card (referred to in this case as a “controller
card”) that enables a computer to communicate with or manage certain peripherals. An external controller is an ex-
pansion card which fills one of the free slots (i.e. PCI or PCMCIA) inside your PC and which enables a peripheral (i.e.
CDR/RW drive, Hard Drive, scanner or printer) to be connected to the computer. If your computer is not equipped with
a FireWire controller card, you can purchase an external controller through LaCie. Contact your LaCie reseller or
LaCie Technical Support (6.
Contacting Customer Support
) for more information.
