LaCie Big Disk Extreme
+
eSATA & USB 2.0
Getting Connected
User Manual
page 2
To connect the power supply:
Connect the power supply cord to the power supply brick.
Connect the power supply to the Big Disk and to a
wall outlet or surge protector.
CAUTION:
Only use the AC adapter supplied with your spe-
cific LaCie drive. Do not use a power supply from another
LaCie drive or another manufacturer. Using any other power
cable or power supply may cause damage to the device and
void your warranty.
Always remove the AC adapter before transporting your LaCie
drive. Failure to remove the adapter may result in damage to
your drive and will void your warranty.
TeChNICAl NOTe:
On/Off/Auto Power Switch:
AUTO
position: allows the drive to be powered on and off au-
tomatically with your computer. If the system’s power fan sup-
ports it, the LaCie Big Disk will spin down while in
the power save mode. The Big Disk will then take
several seconds to spin up to full power. Use this position when
energy efficiency and quiet drive operation are priorities.
ON
position: the drive is always on and ready.
1.
2.
2.1. Connecting the Power Supply
USB 2.O
eSATA
OFF AUTO ON
Figure 2.1
