LaCie Ethernet Big Disk
User Manual
Setting Up Your Ethernet Big Disk
page
3.3. Connecting the Interface Cable
The Ethernet Big Disk gives you the option to connect
either a USB or Ethernet cable. However, the Ethernet
and USB cables can be connected simultaneously only if
there is a DHCP server on the network or machine.
USB 2.0
USB
Fig. ...A.
3.3.1. USB Connection
■
3.3.2. Ethernet Connection
■
1. Connect the Ethernet cable into the Ethernet port on
the back of the LaCie Ethernet Big Disk (
A
).
1. Connect the USB cable into the USB port on the
back of the LaCie Ethernet Big Disk (
A
).
Fig. ...B.
USB 2.0
USB
Fig. ...B.
Fig. ...A.
A
B
2. Connect the other end of the Hi-Speed USB 2.0 cable
into an available USB port on your computer (B).
3. Press the blue On/Off Button on the front of the
drive.
Now move on to step 3, 3.4.,
Driver Installation
(USB only)
.
2. Connect the other end of the Ethernet cable into an
available Ethernet port on your router (
B
).
3. Press the blue On/Off Button on the front of the
drive. It may take a few seconds for your network to
recognize the drive.
Now move on to step 3, 3.5.,
Installing and Running
the Configuration Wizard
.
B
To Ethernet
Big Disk
To Ethernet
Big Disk
A