LaCie Ethernet Big Disk
User Manual
Setting Up Your Ethernet Big Disk
page 0
3.6. Configure Your Drive On a Local Area Network with no DHCP Server
In the case that your server is not DHCP-enabled,
you will need to manually assign the correct network
settings for your LaCie Ethernet Big Disk.
The easiest way to modify your LaCie Ethernet Big
Disk’s network configuration is to use the LaCie IP
Configurator. See chapter 3.5.
Installing and Running
the Configuration Wizard
for information on installing
the network configuration software.
Run the software from the Start Menu (PC users) or
the Utilities folder (Mac users).
When the Wizard opens, select
Advanced Mode
.
Uncheck the “DHCP” box (Fig. 3.6.A.).
Modify the network settings to work with your net-
work.
1.
2.
3.
4.
Fig. ..A.
